MotorScrubber Dry Floor Buffing Pads, White (10/Case)

MotorScrubber Dry Floor Buffing Pads | Buffing Pads for Floor Buffer Programs on M3 and JET3

The white pad is the last tool in the MotorScrubber rotation before a floor is done. MotorScrubber Dry Floor Buffing Pads in White (10/Case) run dry for standard buffing or with a fine water mist to produce a wet-look finish on new or newly maintained hard floors, covering both applications on the M3 and JET3 without a pad changeover. The soft white surface removes light surface marks without abrasion, leaving the finish intact on the pass.

Double-Sided White Buffer Pad, 10/Case | Double-Sided Construction for Extended Pad Life

At 7.9", these pads reach perimeter lines, corners, and confined sections where full-size polishing machines can't fit, handling vertical surface buffing on the same machine pass as the floor. Double-sided construction extends operational life before replacement. Flip when one side loads up and rinse after each use. Each pad covers an estimated 30,000 to 40,000 ft², depending on floor conditions and polishing frequency, and a case of 10 keeps your team stocked through recurring buffing programs without a mid-cycle reorder.

Features

• Runs dry for standard buffing or with a fine water mist for a wet-look finish on new and newly maintained hard floors.
• Soft white surface removes light surface marks without abrasion, leaving the finish intact on the pass.
• Handles vertical surface buffing on the M3 and JET3 without switching pad types.
• Sized at 7.9" to reach perimeter lines, corners, and confined sections outside the full-size polishing machine range.
• Double-sided construction extends pad life. Flip when one side loads up and rinse after each use.
• Estimated coverage of 30,000 to 40,000 ft² per pad, depending on floor conditions and polishing frequency.
• A case of 10 keeps finishing pad inventory steady for facilities on recurring buffing schedules.
• Approved for dry and mist buffing on commercial hard floor surfaces.

For Use With

• MotorScrubber M3 Floor Scrubber Starter Kit. The Compact machine these pads are sized for, handling final-stage buffing and gloss work in tight areas your full-size polisher can't reach.
• MotorScrubber JET3 Floor Scrubber Starter Kit. Runs the same dry and mist buffing applications as the M3 with built-in on-demand spray for wet-look finish passes.

Build Your MotorScrubber Pad Program

• MotorScrubber Floor Stripping Pads, Black (10/Case). Heavy-duty wet stripping for floor polish, worn sealers, and wax buildup along baseboards and perimeter areas.
• MotorScrubber Floor Scrubbing Pads, Green (10/Case). Tackles grease, heavy soil, and scuff marks on commercial hard floors.
• MotorScrubber General Floor Cleaning Pads, Blue (10/Case). Routine wet scrubbing for scheduled hard floor maintenance between strip cycles.
• MotorScrubber Floor Polishing Pads, Red (10/Case). Gloss restoration and light scrubbing on hard and wood floors.