Dyson Airblade V, Hand Dryer with HEPA Filtration
- SKU:
- 307174-01
- UPC:
- 0885609009933
- MPN:
- 301828-01
- Availability:
- Ships in 2-3 days
- Shipping:
- Free Shipping
Description
Dyson Airblade V | HEPA-Filtered Hand Dryer for High-Traffic Restrooms
The Dyson Airblade V (model HU02) is a slim, wall-mounted, touch-free hand dryer that dries hands in 12 seconds and filters restroom air through sealed HEPA filters before it reaches users' hands. According to Dyson, the HEPA filters capture 99.97% of particles as small as 0.3 microns, including bacteria and viruses. Air streams reach 420 mph on the 100–120V model, and Dyson estimates operating costs of about $43 per year per unit and up to 77% lower CO2 emissions than traditional hand dryers.
The Dyson Airblade V projects just 4 inches from the wall, is ADA-compliant, and installs without recessing. It is available in 100–120V and 200–240V versions and is certified by NSF International to the P335 hygienic commercial hand dryer standard.
Why Facilities Choose the Dyson Airblade V
The Dyson Airblade V is built for restrooms where space, hygiene, and running costs all matter. Its compact profile frees up wall space in small washrooms, and the dual sealed HEPA filters clean the air before it is blown onto hands. The Dyson digital motor V4 drives air through two narrow apertures to scrape water from hands in 12 seconds, which keeps lines moving in busy restrooms.
Compared with paper towels, the Airblade V removes the cost of restocking, the labor of refilling dispensers, and the waste of used towels. Dyson states that the Airblade V can cut hand-drying costs by up to 97% compared with paper towels and that it carries a lower carbon footprint than paper towels, which matters for facilities working toward sustainability or LEED goals.
Product Highlights
- Dries hands in 12 seconds (tested to NSF P335)
- Dual sealed HEPA filters capture 99.97% of particles as small as 0.3 microns
- Certified as a hygienic commercial hand dryer by NSF International (P335)
- Estimated operating cost of about $43 per unit per year, according to Dyson
- Up to 97% lower hand-drying costs than paper towels, according to Dyson
- Lower CO2 emissions than traditional hand dryers and paper towels, according to Dyson
- Slim profile projects 4 inches from the wall; no recessing required
- ADA compliant for accessible installation
- Available in 100–120V and 200–240V versions
- Built for high-traffic restrooms in offices, schools, gyms, healthcare, and hospitality
Frequently Asked Questions
How loud is the Dyson Airblade V?
Dyson rates the Airblade V at 63 dB(A) sound pressure measured at 2 meters, with a sound power level of 79 dB(A). That makes it suitable for offices, hotels, medical facilities, and other restrooms where noise matters.
How much does the Dyson Airblade V cost to operate per year?
Dyson estimates operating costs of about $43 per unit per year. Actual costs depend on local electricity rates and how many times the dryer runs each day. Switching from paper towels also removes restocking labor and towel waste.
How often do the HEPA filters need to be replaced?
Replacement timing depends on how heavily the restroom is used and how dusty the air is. The Airblade V uses two HEPA filters, one on each side, and Dyson sells replacements as a pair (Dyson part 965280-01). Owners can replace the filters themselves without an electrician.
What electrical requirements does the Airblade V need for installation?
The Airblade V has a 1,000W motor and draws 9.09 amps at 110V or 4.54 amps at 220V. It comes in a 100–120V version and a 200–240V version. Installation should be performed by a licensed electrician following Dyson's installation guide and all local and national electrical codes.
Can the Dyson Airblade V be used in healthcare, food service, or restaurant settings?
Yes. HEPA filtration, touch-free operation, and NSF International P335 certification make the Airblade V suitable for hygiene-sensitive restrooms in healthcare, food service, education, and hospitality facilities.
Is the Dyson Airblade V ADA compliant?
Yes. The Airblade V projects just 4 inches from the wall and mounts at ADA-compliant heights, so it does not obstruct accessible restroom pathways. No recessing or wall modification is required. Consult local accessibility codes for site-specific installation guidelines.
Specifications
- Model: Dyson Airblade V, HU02
- Finish: Sprayed nickel
- Dry Time: 12 seconds (tested to NSF P335)
- Voltage: 100–120V or 200–240V (select at checkout)
- Frequency: 50/60 Hz (60 Hz above 115V on the 100–120V model)
- Motor Power: 1,000W
- Current Draw: 9.09A at 110V; 4.54A at 220V
- Standby Power: Less than 0.5W
- Air Speed: 420 mph (100–120V); 430 mph (200–240V)
- Noise Level: 63 dB(A) sound pressure at 2 m; 79 dB(A) sound power
- Filter: Dual sealed HEPA filters; capture 99.97% of particles as small as 0.3 microns
- Replacement Filters: Dyson part 965280-01 (pair)
- Dimensions: 15.5" H x 9.22" W x 4" D
- Weight: 6.32 lbs (net)
- Certifications: NSF International P335; ADA compliant
- Warranty: 5-year parts; 1-year labor
- Suggested mounting heights from floor to bottom of dryer:
- Men 37" (93 cm)
- Women 35" (91 cm)
- Children 27" (69 cm)
Warranty
5 Year Parts Warranty
All factory parts of your Dyson hand dryer are warrantied against original defects in materials and workmanship when used in accordance with the owner's manual and installations guide for a period of 5 years from the start of your warranty.
1 Year Limited Labor Warranty
Dyson will carry out all repairs with no labor charge for 1 year from the start of your warranty.