Commercial Carpet Extractor | Bissell

Bissell BG10 Commercial Carpet Extractor | Spot Extraction for Rooms, Offices, and Stairs

The Bissell BG10 Commercial Carpet Extractor is a compact, dual-motor carpet cleaner built for guest rooms, offices, stairs, and spot extraction on high-traffic carpet. Its DirtLifter power brush and 10-inch cleaning path lift embedded dirt and stains from carpet fibers, while the 1.75-gallon solution tank and 2-gallon recovery tank keep refill stops to a minimum during room-by-room cleaning. Upholstery and stair cleaning require the BISSELL hose and upholstery tool (accessory pack 30G3), which is sold separately.

12-Amp Dual Motor Extraction | Bissell BG10 Carpet Extractor

The Bissell BG10 pairs a 12-amp motor with 103 inches of water lift and edge-to-edge suction to pull dirty water out of carpet fibers. Two rows of rotating brushes agitate the carpet as you clean, and the BG10 cleans in both forward and backward passes. At 42 lbs, with an adjustable handle and multiple carry handles, the BG10 moves easily between rooms, floors, and service closets in hotels, offices, schools, and other commercial facilities.

Explore Bissell’s versatile range of cleaning tools and equipment, designed to tackle a variety of cleaning tasks across your facility with ease.

Features

• Dual motors and DirtLifter power brush for deep carpet cleaning
• 1.75-gallon solution tank and 2-gallon recovery tank for room-by-room cleaning with fewer refills
• 10-inch cleaning path for guest rooms, offices, hallways, and spot extraction
• 103-inch water lift and edge-to-edge suction for effective extraction
• Two rows of rotating brushes agitate carpet fibers
• Cleans in both forward and backward motions
• Adjustable handle and multiple built-in carry handles
• Easy-Clean brush roller simplifies maintenance
• 12-amp motor with a 25-foot, 16-gauge OSHA pigtail power cord
• Housing made from V-rated flame-retardant plastics
• Cleans upholstery and stairs with the hose and upholstery tool (accessory pack 30G3, sold separately)
• Limited 1-year commercial warranty

How To Use

1. Prepare the Area: Begin by vacuuming the carpet to remove loose dirt and debris, ensuring a more effective clean.
2. Remove and Fill Tanks: Separate the clean water tank from the dirty water tank. Fill the clean water tank with warm water up to the indicated line and add two capfuls of Bissell Commercial Cleaning Solution. Reattach the tanks with the dirty water tank on top.
3. Start Cleaning: Turn on the extractor, lower the handle to the desired position, and squeeze the trigger to begin the cleaning process. Move the machine slowly forward and backward across the carpet.
4. Empty and Refill Tanks: When the flow indicator stops spinning, it’s time to refill the clean water tank. Empty the dirty water tank and refill the clean water tank as needed.
5. Post-Cleaning: After use, empty and rinse both the clean and dirty water tanks thoroughly. Clean the brush roll and ensure everything is properly dried before storing the extractor.

Things to Consider

• Hose and hand tool sold separately: Order accessory pack 30G3 if you plan to clean upholstery, stairs, or tight spots.
• Cleaning path: The 10-inch path is built for rooms, offices, and spot work, not for large open carpeted areas such as ballrooms or open-plan floors.
• Weight: At 42 lbs with tanks empty, the BG10 is heavier once the tanks are full. Use the carry handles and empty the recovery tank before carrying it up or down stairs.
• Power: The BG10 runs on a 25-foot OSHA pigtail cord. Plan outlet access room by room, or use a commercial-grade extension cord rated for a 12-amp load.
• No heater: Results depend on starting with warm tap water, so fill the tank close to the point of use.