null

Bulldog Scrubbers

Bulldog Walk-Behind Commercial Mat Scrubber, WD20 2.0

SKU:
WD20-2
MPN:
WD20
Availability:
Ships in 3-4 weeks
Shipping:
Calculated at Checkout
Freight Delivery:
Ships on a pallet (about 575 lbs). Have a loading dock? Choose Freight to a loading dock ($500). No dock? Choose Freight with liftgate ($700) – the driver lowers the pallet to your curb. Curbside only; the carrier will call to schedule.
bulldog wd20 walk-behind floor scrubber
bulldog wd20 floor scrubber
wd20 walk-behind floor scrubber
20 inch commercial floor scrubber
walk behind mat scrubber wd20
$6,795.00
Frequently bought together:

Description

Bulldog WD20 Walk-Behind Floor & Mat Scrubber for Commercial Facilities

Built for demanding, high-traffic facilities, the Bulldog WD20 Walk-Behind Mat Scrubber is a commercial floor cleaning machine designed to handle a wide range of matting systems and hard floor surfaces. It is well suited for gymnasiums, athletic complexes, schools, and other busy environments where dependable, easy-to-operate equipment is essential. Batteries and charger are included.

Updated for the 2.0: The WD20 2.0 features larger 15-gallon solution and recovery tanks for extended cleaning runs with fewer refill stops.

High-Performance Single-Pass Cleaning for Mats and Floors

With theoretical productivity of up to 20,000 square feet per hour, the WD20 helps reduce labor time while improving routine floor care efficiency. Its 20-inch scrubbing disk applies strong downward pressure with fast rotational action to loosen embedded dirt and stubborn buildup.

A stainless steel squeegee fitted with a urethane blade works alongside a powerful vacuum motor to recover water effectively, leaving surfaces cleaner and significantly drier after one pass. The 15-gallon solution and recovery tanks support extended run times, reducing refill stops across larger cleaning areas.

Features

  • Designed for deep cleaning rubber athletic flooring, stall mats, interlocking tiles, and vulcanized or recycled rubber surfaces
  • 20-inch scrubbing disk agitates and lifts heavy soil and persistent residue
  • Trigger-activated solution control simplifies operation and reduces waste
  • Powerful vacuum system channels dirty water into a central recovery tank
  • Optional remote scrub and vacuum wand enhances reach for detailed cleaning
  • Three rear rubber wheels ensure smooth, stable maneuverability
  • Heavy-duty scrubbing disks install quickly and easily
  • Compatible 20-inch polishing pads available separately
  • Full-width dual squeegee maximizes water pickup and minimizes streaking
  • Recovery tank tilts up to 90° for simple draining and maintenance
  • Runs on two 12-volt, 95 Ah batteries wired as a 24-volt system (batteries and charger included)
  • Proudly manufactured in the United States

Frequently Asked Questions

What batteries does the Bulldog WD20 use?

The Bulldog WD20 runs on two 12-volt, 95 Ah batteries wired in series for a 24-volt system. Both batteries and a 24-volt charger come included with the machine, so it’s ready to run on delivery. Replacement batteries and chargers are also available separately.

How long does the WD20 run on a full charge?

The WD20 has an estimated run time of up to 2 hours per charge. Actual run time depends on the floor type, the soil level, and how often the scrub and vacuum motors run at the same time.

How do you charge the Bulldog WD20?

Plug the included 24-volt charger into a standard 120-volt, 60 Hz outlet and connect it to the machine's charging port. Bulldog lists battery charging as a daily maintenance step, so charge the WD20 after each shift, and always charge it in a well-ventilated area because the batteries release hydrogen gas while charging.

Can the WD20 clean rubber gym flooring?

Yes. The WD20 is built for rubber athletic flooring, stall mats, interlocking rubber tiles, and vulcanized or recycled rubber surfaces, and it also scrubs hard floors such as concrete, VCT, tile and grout, and stone. It is not designed for carpet. Keep solution water below 135°F, since hotter water voids the tank warranty, and pair it with a rubber floor cleaner and degreaser.

Do I need a loading dock or a liftgate for delivery?

The WD20 ships on a pallet of about 575 lbs. If your facility has a loading dock, choose Freight to a loading dock. If it does not, choose Freight with liftgate so the driver lowers the pallet to your curb. Delivery is curbside only, and the carrier calls ahead to schedule. Once it arrives, use the supplied ramp to back the machine off the pallet with the scrub head raised.

Things to Consider

  • Weight: The WD20 weighs 372 lbs with batteries. Always drive it forward up and down ramps, never turn on a ramp, and do not operate it on slopes greater than 3°.
  • Storage: Store the WD20 indoors on a level, hard surface. Do not store it outdoors or pressure wash it, since moisture can damage the electronic controls. Drain both tanks into an approved drain before storing.
  • Door width: The machine body is 22.5 inches wide, and the squeegee assembly is wider than the body. Measure doorways, elevators, and hallways before purchase, and plan to raise or remove the squeegee when moving through narrow openings.
  • Battery replacement: Replace batteries with the same 12-volt, 95 Ah size Bulldog specifies for the 20-inch disk deck. Disconnect the batteries before any service, and wear face protection, gloves, and protective clothing when handling them.

Specifications

  • MPN: WD20
  • Power Source: Battery-powered
  • Overall Dimensions: 49.5" L x 22.5" W x 38" H
  • Weight: 238 lbs (without batteries); 372 lbs (with batteries)
  • Cleaning Path: 20 inches
  • Squeegee Width: 34 inches
  • Solution Tank Capacity: 15 gallons
  • Recovery Tank Capacity: 15 gallons
  • Brush Speed: 180 RPM
  • Brush Motor: 0.75 HP (550W)
  • Vacuum Motor: 0.6 HP
  • Working Speed: 2.3 MPH
  • Transport Speed: 3 MPH
  • Productivity: Up to 20,000 sq ft/hr (theoretical)
  • Batteries: Two 12-volt, 95 Ah batteries (included)
  • System Voltage: 24 V DC
  • Run Time: Up to 2 hours (estimated)
  • Charger: Included; 120 VAC / 60 Hz input; 24 VDC / 12 A output
  • Noise Level: 69 dBA
  • Country of Manufacture: USA
  • Compatible Accessories: 20-inch scrubbing brushes, 20-inch floor pads, and a 20-inch pad driver (sold separately)
  • Optional Accessory: Remote scrub and vacuum wand
  • Recommended Applications: Fitness centers, schools, athletic facilities
View AllClose

Warranty

Manufacturer's Warranty:

  • Parts: 3 Years
  • Labor: 1 Year
  • Poly (Tanks): 10 Years
  • Travel: 90 Days (a Bulldog-authorized service technician's trip to your facility for a covered repair is included during the first 90 days after purchase; after 90 days, travel is billed separately)

The warranty covers defects in materials and workmanship in the United States and Canada. It does not cover normal wear items (such as squeegee blades, brushes, pads, hoses, belts, and cords), shipping damage, misuse, incompatible chemicals, or repairs by anyone not authorized by Bulldog. Filling the tanks with water hotter than 135°F voids the tank warranty.

How to File a Warranty Claim:

  • Find the serial number on the lower half of the WD20's control panel.
  • Contact Us or call 888-566-0809 with your order number, the serial number, and a short description (and photos, if possible) of the problem.
  • We send the claim to Bulldog, which approves warranty repairs through its factory-authorized service centers.
  • An authorized technician completes the repair. Do not open or repair the machine yourself before the claim is approved, since unauthorized repairs void the warranty.
View AllClose